1. Brief
The BIOKAU® Porcine reprodutive and respiratory syndrome virus antibody test kit(PRRSV Ab) is used for the detection of PRRSV antibodies in swine serum; assessment of immunity conditions against porcine reprodutive and respiratory syndrome virus in the pig farms; and investigation epidemiology of the PRRSV.
2. Principle
The BIOKAU® PRRSV Ab ELISA test kit is made from the antigen coated microtiter plate, goat-anti-pig IgG-HRP and other reagents. It applies the indirect ELISA principle to test the antibodies against PRRSV in porcine serum. In the test, the coated antigen combine with PRRSV-IgG in serum, then add IgG-HRP to specifically bind with complex of antibody-antigens on the microplate. With the TMB substrate, it will generate an amount of color. The depth of color is relative with the content of the PRRSV-IgG.
3. Components
1 PRRSV Coated Microplate.............................................. 2 plates (96 wells)
2 PRRSV Negative control (green lid).................................... 1 tube (1.5 mL)
3 PRRSV Positive control (red lid)........................................ 1 tube (1.5 mL)
4 PRRSV Enzyme Conjugate (yellow lid)................................ 1 bottle (22 mL)
5 Wash Concentrate (20×) (white lid)..................................... 1 bottle (50 mL)
6 Substrate A (purple lid)/B (yellow lid)................. 1 bottle each (12 mL/bottle)
7 Stop solution (blue lid)....................................................... 1 bottle (12 mL)
8 Sample diluent solution (transparent lid).............................. 1 bottle (25 mL)
9 Adhesive Foil................................................................................. 6 pieces
10 Instruction...................................................................................... 1 piece
4. Material Required not Provided
1 Microplate Reader(wave length: 450/630 nm).
2 Microplate Washer.
3 Micropipettes, adjustable.
4 Constant temperature box or incubator.
5 Oscillator.
5. Sample requirement
1 The samples are porcine serum, which should be collected with no bacteria. The storage time should be less than 1 week at 2-8 ℃, if for long term, it should be kept at -20℃.
2 Avoid to use the samples with severe hemolysis, precipitate, contaminated by bacteria or protein suspension.
3 The EDTA, heparin sodiun and other anticoagulants will not affect the results.